IEN Number
Keywords
Category
Plastics Plant Equipment also available at:
Home
Used Equipment Categories
Industrial Sites
Sell Items
About Us
Login
Register
Equipment Listings
Slitter Rewinders
Specialty Production Lines
Calender / Embossing Equipment
Bag Machines
Flexographic Printers
Other Converting Equipment
Coaters / Laminators
Die Cutters / Guillotine Cutters
Sheeters
Corrugating Equipment
Poly Extrusion Equipment
Tissue / Towel Equipment
Useful Links
Converting Industry Construction Management Professionals
Converting Consultants and Contract Engineer
Converting Equipment Vendor
Converting Associations and Professional Organization
Machine Listing - Plate & Tray Forming Line
IEN
126407
Quantity
One (1)
Manufacturer
Peerless
Speed
30 Strokes/Min
Width
57.5"
Year (age)
1997
Model
BF57.5
Equipment Class
Forming Line
Type
Plate & Tray
Length
22"
Please Contact Us for More Information
Description:
Peerless Blank Fed Plate & Tray Forming Line. Age Approx. 1997. Was Making Food Service Trays. Takes Die Cut Blanks, Put in Lifting / Feeding Section. Forming Head Section. Conveyor / Stacker Delivery Section. Blank Feed. Model BF57.5 Gear Driven Variable Speed 30-Ton Blank Press. 4" Stroke. Pressing Service, 57.5" Wide by 22" Long. Angle of Machine 35 Degrees. Machine is Intended to be Used for Either 1, 2, 3 or 4 Dies of Varying Size and Can Run Up to 30 Strokes Per Minute. in the 2-Wide Configuration, Blanks of 19.5" to 24" Wide. in the 3-Wide Setup, Blanks Can be 7" to 13.5". with 4 Dies, the Width Can be 7.5" to 11.5". The Length of the Blank Should be Less or Equal to the Width with the Maximum Length Being 22". Forming Dies Are Designed with the Male Die Mounted on the Bottom. Blank Feed System Designed for 1, 2, 3 or 4 Lane Set Up. Paper Plate Tray Machine Operation is Controlled from the Main Operator Console. Machine has Siemens Ready Panel. Temperature Range Settings Are Due to the Many Types of Paper Coatings, Moisture Content & Inks. Top Die, Heat Can be Controlled. Bottom Die, Heat Can be Controlled & Varied. Machine is Based on Crown Blank Fed Forming. Maximum Forming Depth, Typically 1.5". (7) Sets of Stainless Steel Dies Are Included; Each Set Makes a Different Product. Each Set is Made Up of a Top & Bottom Die; Total of (14) Pieces. Top & Bottom Heating of Dies. Photos Show Samples and the Forming Dies for Six of the Products Made on the Machine. # 4 Forming Die Set is in the Machine. No Sample is Available. It is a 10"X14" Oval Product and is Shown in Photos. Manuals & Blueprints Are Included. Machine is in Excellent Mechanical Condition. Approx. Weight, 28,000 Lbs. Machine Fits in High-Cube Container. Cost to Load & Secure Into Overseas Container, $1,500 Additional. Approx. $550,000 was Spent on Machine When Purchased New. Set Up on 480 Volt, 60 Cycle, 3 Phase. Autocad Drawings of Dies Needed to Make Dies for Blanks That Are Then Used in Peerless Machine Are Available from Peerless.