http://www.plasticsplant.com
  • English
  • Spanish
  • Chinese

Equipment Listings - Center Wind Rewinders

    • IEC# 120076 - McGuckin & Pyle Rewinder Year 2009. No Production Running Hours Accumulated. Floor Pick-up, Center, Shaftless rewinder with Dancer Tension Control, and Plant Form. Power: 480 V, 3 Phase 120a full load (Allen Bradley Power Supply / PowerFlex...
      For Information...
    • IEC# 123970 - 60" B.F. Perkins single position unwind and single position center rewinder.  Age 1979.  2000 FPM maximum speed.  60" maximum web width. 440 voltage, 60 cycle, 3 phase.  Single position detached unwind, set up for 58" dia. rolls of material.  6" &...
      For Information...
    • IEC# 123967 - 75" Black Clawson unwind center rewinder. 80" roll face. Four major components; Black Clawson hydra-lift unwind, 60" dia., max weight 7,500 lbs, shaftless floor pickup, auto tension, auto edge guide. 7.375" OD mechanically locking core plugs. ...
      For Information...
    • IEC# 126123 - 73” Cameron Duplex Slitter Rewinder, 24” Rewind Diameter, Model 354, Year 1989, S/N: 5359. Design Speed 800 Ft/min Design Speed on non-wovens. Shaftless unwinder, chucks for core diameter 3" or 6". This is a driven unwind with 20 HP DC motor. ...
      For Information...
    • IEC# 126072 - 19” C&S Machine 3-position rewinder. Age 2000. Machine has (1) unwind position and (3) center rewind positions. Cantilevered unwind & rewind. Penta Power DC drives & controls, set up for 115 voltage, 50 or 60 cycle. Magnatech motors, DC, 1 HP. 19”...
      For Information...
    • IEC# 123992 - 72” Width x 50” Diameter Unwind and Rewind of same dimensions with solid state controls and drives: **** (1) UNWIND: 72" Width x 50” Diameter, John Dusenbery Model 704AD single position unwind stand.  Automatic edge guiding system with pneumatic...
      For Information...
    • IEC# 126106 - 62” custom-built, center rewind Simplex slitting & rewinding machine. Has been used for slitting & rewinding paper products, paper/foil laminations, label stock. Minimum slit width 4” wide slits. Machine was overhauled & rebuilt in 2007. Two videos...
      For Information...
    • IEC# 126111 - 65” Webtec / Hsia Yan Industries Model HY-FQ automatic 4-shaft log cutting machine. Age 1994. Suitable for cutting OPP tape, masking tape, double-side tape, foam tape & kraft paper tape. Knife support to adopt servo motor for high speed, constant...
      For Information...
    • IEC# 126112 - 63” Goebel Rapid D Model RD-1600 single shaft, center rewind slitter rewinder. Age 1968. Detached unwind. Manual skew adjustment. 6” air unwind & 6” air rewind shaft. EL automatic edge guiding system with electronic eye sensor for automatic edge...
      For Information...