http://www.plasticsplant.com
  • English
  • Spanish
  • Chinese

Equipment Listings - Slitter Rewinders

  • Single Drum Surface Rewinder
    • IEN# 126068 - 62" Cameron surface rewind slitter rewinder. Type 600 single shaft simplex rewinder. Model SSU unwind. 1500 FPM operating speed. Age 1977. Model SSUSM unwind. Surface driven unwind. Up to 4,000 lb. rolls. Locked core surface rewinding with counter...
      For Information...
  • Turret Winders
    • IEN# 125911 - 60” Black Clawson Turret Rewinder, 60” Width x 36” Diameter Rolls. 3” Rewind Shafts. Inlcudes load cells for tension control and an Accuguide unit. Winder drive is 7.5 HP DC motor. Turret Motor is 4.9 HP 230/460 V Motor.
      For Information...
    • IEN# 123991 - 63" (1600mm) Pacific Elite Industries Model R-301-S automatic turret logger. New 2000. Heavy-duty and two shafts turret change design for rewinding all kinds of adhesive backed material. Both center & center surface winding available. Some...
      For Information...
    • IEN# 123971 - 63" Worldwide unwinds & rewind.  Two turret unwinds.  One turret rewind. Age 1987.  Was unwinding masking tape base paper & OPP film.  Line speed 1000 FPM.  Unwind tension, 10 - 100 lbs. total.  Process tension, 0 to 40 lbs. total.  Maximum dia....
      For Information...
  • Center Surface Winders
    • IEN# 124013 - 83" Arrow Model 2000 center surface rewind slitter rewinder with closed loop constant surface winding system.  Age 1983.  Can be run as surface or center surface winder.  Maximum speed 2500 FPM.  87" wide rolls. Maximum rewind dia. 50".  Maximum...
      For Information...
    • IEN# 119406 - 48” Width Schmutz Mod# K1-46, Year 1963, Single Shaft Center Wind Slitter, 46" Max. Rewind Roll Diameter, 1000 Fpm, 8" Min. Slit Width, Shear Slitting, Separate Model OH-48-1963 Single Position Shaftless Unwind With 50" Roll Diameter Capability,...
      For Information...
  • Center Wind Rewinders
    • IEN# 123970 - 60" B.F. Perkins single position unwind and single position center rewinder.  Age 1979.  2000 FPM maximum speed.  60" maximum web width. 440 voltage, 60 cycle, 3 phase.  Single position detached unwind, set up for 58" dia. rolls of material.  6" &...
      For Information...
    • IEN# 123967 - 75" Black Clawson unwind center rewinder. 80" roll face. Four major components; Black Clawson hydra-lift unwind, 60" dia., max weight 7,500 lbs, shaftless floor pickup, auto tension, auto edge guide. 7.375" OD mechanically locking core plugs. ...
      For Information...
    • IEN# 126123 - 73” Cameron Duplex Slitter Rewinder, 24” Rewind Diameter, Model 354, Year 1989, S/N: 5359. Design Speed 800 Ft/min Design Speed on non-wovens. Shaftless unwinder, chucks for core diameter 3" or 6". This is a driven unwind with 20 HP DC motor. ...
      For Information...
    • IEN# 126072 - 19” C&S Machine 3-position rewinder. Age 2000. Machine has (1) unwind position and (3) center rewind positions. Cantilevered unwind & rewind. Penta Power DC drives & controls, set up for 115 voltage, 50 or 60 cycle. Magnatech motors, DC, 1 HP. 19”...
      For Information...
    • IEN# 123992 - 72” Width x 50” Diameter Unwind and Rewind of same dimensions with solid state controls and drives: **** (1) UNWIND: 72" Width x 50” Diameter, John Dusenbery Model 704AD single position unwind stand.  Automatic edge guiding system with pneumatic...
      For Information...
    • IEN# 126106 - 62” custom-built, center rewind Simplex slitting & rewinding machine. Has been used for slitting & rewinding paper products, paper/foil laminations, label stock. Minimum slit width 4” wide slits. Machine was overhauled & rebuilt in 2007. Two videos...
      For Information...
    • IEN# 126151 - 62” Dusenbery 10000 L-5 Duplex Center Wind Slitter Rewinder, New 1990. Shear Slitting, 40″ Diameter Unwind, 24″ Rewind Diameter with Top Rider Rolls, and 28″ Diameter without, 4 Tension Zone Differential Rewind Shafts, Spreader Roll Prior to...
      For Information...
    • IEN# 126111 - 65” Webtec / Hsia Yan Industries Model HY-FQ automatic 4-shaft log cutting machine. Age 1994. Suitable for cutting OPP tape, masking tape, double-side tape, foam tape & kraft paper tape. Knife support to adopt servo motor for high speed, constant...
      For Information...
    • IEN# 126112 - 63” Goebel Rapid D Model RD-1600 single shaft, center rewind slitter rewinder. Age 1968. Detached unwind. Manual skew adjustment. 6” air unwind & 6” air rewind shaft. EL automatic edge guiding system with electronic eye sensor for automatic edge...
      For Information...
  • Duplex Rewinders
    • IEN# 120316 - 45 in. Center Slitter Mfg. Dusenbery, Duplex Design. Model 635. This machine has specifications as follows: Single Position Integral Unwind; Maximum Unwind Roll Diameter of 32 ; Manual Pneumatic Unwind Braking; Duplex Differential Rewind; Maximum...
      For Information...
    • IEN# 126227 - 64" Kampf Duplex Turret Rewinder, Model #KS 016A, Center Surface Winder, 20" Diameter Rewind, 3" Air Shafts. Cantilevered shafts for easy unload of finished rolls. Turret rewind allows for Continuous operation. Previously used for slitting and...
      For Information...
    • IEN# 126204 - 31” Stanford Model 336C duplex, cantilevered rewind, center rewind slitter rewinder. Age 1988. Unwind roll diameter is 30”. Rewind roll diameter is 30”. Maximum web speed is 750 FPM. Maximum parent roll weight is 1,100 lbs. Two pneumatic rewind...
      For Information...
    • IEN# 120317 - 54 in. Center Slitter/Rewinder Mfg. Dusenbery. Model 810, Duplex Design. Unit comes with a pair of 3" single differential rewind shafts, the winding is the same as a Dusenbery 635. Maximum speed is 300 FPM and a rewind diameter of 16". The unwind...
      For Information...
    • IEN# 123974 - 30" Dusenbery Model 635 duplex center rewind dual turret slitter rewinder. Age 1993. Machine designed for converting typewriter ribbons, semi-transfer tape & thin films. Designed for narrow slits, small diameter rewind. Unwind station. Nip...
      For Information...
    • IEN# 126039 - 63" Kampf Duplex Cantilever Slitter Rewinder, Model Conslit US 108. New 1994. Center Rewind type with Cantelevered Rewind Shafts. 31.5" dia. (800mm) rewind on 6" cores. Fixed mounted rewind shaft with swingable support levers on the non-drive side.
      For Information...
    • IEN# 125944 - 15” Independent Machine Company duplex center rewind slitting & rewinding machine. Model 15 SR. Age 1993. Serial # 7089-0993. Center rewinder. Cantilevered rewind & unwind shafts. Shear cut slitting with eccentric lock shears. (3) sets of shear...
      For Information...
    • IEN# 126076 - 54" Dusenbery Model 635 AL duplex center wind slitter rewinder. 54" maximum web width. Equipped with attached unwind which will accept 32" diameter rolls of material. Unwind equipped with (1) air shaft set up for 3" cores. Brake system is...
      For Information...
    • IEN# 126038 - 94" Dusenbery Duplex Slitter Rewinder, Model 10,000 HD, Level 2, Center Rewind. Razor & shear slitting. Age 1987. 28" max dia. rewind without layon rolls. 24" dia. rewind when using layon rolls. Air-loaded dual differential rewinding, 4 zone....
      For Information...
    • IEN# 126180 - 65” Trim Width, Dusenbery Model 10000 Slitter Rewind. Level 3. Duplex Slitter Rewind Arrangement. Attached Unwind, 42” Diameter. Erhardt and Leimer Web Guide. Shear Cut Slitting. 24” Max Rewind Diameter. Center Wind with Lay-on Rolls. ...
      For Information...
    • IEN# 126131 - 70” Stanford Model 338 MCS duplex center rewind slitting & rewinding machine. Age 1991. Designed for flexible packaging, paper, film, laminations. Up to 1000 FPM. Model 338 features two drive motors. Smooth, no step operation with controlled...
      For Information...
    • IEN# 126066 - 45" Cameron Model CS600 center surface or automatic minimum gap rewind, duplex slitting & rewinding machine. 3" air cantilevered rewind shafts. Differential rewind, spacerless rewind shafts. Differential, torque & combination winding modes. (4)...
      For Information...
    • IEN# 118160 - 122” Cameron Type 6808 Duplex Rewinder, Combination Center-Surface Slitter Material: 27-105#/3000 Sq; 4500 FPM; Model 950-SMP60-DL-F; Previously used with Coated Paper(carbonless) Maximum Tension-5 1/2 PLI Maximum Web; Width-122"; Maximum Mill...
      For Information...
    • IEN# 126086 - 74" Dusenbery Model 260 FS duplex center surface rewind slitting & rewinding machine. Age 1980. 24" maximum rewind roll diameter. 1500 FPM. 2" minimum slit width. Dusenbery shear cut slitting. Tangential shear cut. (5) male knives. (90) female...
      For Information...
  • Two Drum Winders
    • IEN# 125984 - 83” Cameron 10 Slitter Rewinder. Two Drum rewind, single shaft, slitting & rewinding machine. Heavy-duty slitter rewinder. Used for high-speed operation. Can slit & rewind papers, wax / gummed / coated papers, uncoated papers, board, textiles,...
      For Information...
    • IEN# 126154 - 64" Horne Slitter Rewinder, 72" Rewind Diameter, 72" diameter Powell Shaftless Floor Pick-Up Unwind, 3"-12" Unwind Chucks, Lowering Table, 100 HP DC Drive, 3",4",5",6" Leaf Rewind Shafts, 1 1/2" Min Slit, 7 Male Slitters, 25 Female Slitters, Ideal...
      For Information...
    • IEN# 126103 - 100” Jagenberg Vari-Dur 2-drum surface rewind slitter rewinder. Type 43-18A. Serial # 3120821. 70” dia. rewind. Shaftless or shafted rewind. 108” bedrolls, 20” dia., plasma coated. Grooved bedrolls. Shear cut slitting. 3” minimum slit width. (5)...
      For Information...
    • IEN# 123968 - 56" Faustel 2-drum surface rewind single shaft rewinder. Was inline with a laminator operating at approx. 750 FPM. Was rewinding film paper laminations. Smooth steel bedrolls. Face width of bedrolls 56". Bedrolls are geared together & are...
      For Information...
    • IEN# 126073 - 73" Cameron 10 two-drum surface rewind single shaft slitter rewinder. Has been slitting & rewinding kraft paper, hand towel materials, papers & non-wovens wipes. Capable of slitting & rewinding paper, laminations, napkin stock, toweling stock, wax...
      For Information...
    • IEN# 124044 - 85" Jagenberg Vari Dur 2 Drum Surface Winder. 72” Rewind Diameter. Shaftless unwind & rewind, slitting & rewinding machine. Type 43-18. 88" wide bedrolls, 20" dia., plasma coated. 24" minimum web width. 72" dia. unwind. 3", 5" & 6" cores on...
      For Information...
    • IEN# 126074 - 72” Langston Model AA 2-drum surface rewind, single shaft, slitter rewinder. PCMC belt-driven unwind, shaftless. Air chucking. Belt driven from below. Two belts. 72” dia. rolls. Auto tension control with Foxboro power positioner dancer controlled....
      For Information...
    • IEN# 126109 - 150” Cameron Type 18, 2-drum surface rewind, single shaft slitter rewinder. Most recently slitting & rewinding paper, nonwovens, Tyvec products. Manufacturer’s brochure indicates speeds up to 2500 FPM, depending on product being slit & rewound....
      For Information...
    • IEN# 126067 - 72” Cameron 400 Series 2-drum surface rewind, single shaft slitter rewinder. Speeds up to 1000 FPM. Maximum rewind diameter 30”. Score cut slitting; score cut slitting is done off of the bedrolls. 5.3” dia. hardened steel sleeve platen roll. 2” dia.
      For Information...
    • IEN# 124219 - 82" Cameron 14 Two Drum Slitter Rewinder.  60" Diameter A&F shaftless backstand with floor lift scissors table.  Water-cooled braking. Skew adjustment.  Tapered chucks.   shear slitting with (11) Tidland shear male assemblies.  Bowed Roll.  3"...
      For Information...
    • IEN# 125951 - 80” Appleton Model 125, low profile, 2-drum surface rewind, single shaft slitter rewinder. Jagenberg Model DA shaftless floor pickup unwind; heavy-duty capacity. Inclined ramp unwind. Minimum roll width 16”. Maximum roll width 90”. 6” core plugs on...
      For Information...
    • IEN# 126134 - 60” Johnstone Model 10 FSRS, heavy-duty design, single shaft, 2-drum surface rewind slitter rewinder. Johnstone shaftless floor pickup detached unwind. 72” dia. rolls on unwind, shaftless. 3” Double E mechanical chucks. Hydraulic cylinder mounted in
      For Information...
    • IEN# 124221 - 94" Langston two drum slitter rewinder.  3000 FPM.  60inch Diameter Rewind.  Independent drum drive, 50 Hp, 500v DC drive.  Drum face 100" (2.54m).
      For Information...
    • IEN# 123738 - 60" Richmond Industrial Model # 2600 two drum surface rewind single shaft robotic automatic transfer slitter rewinder.  New in 1998. Purchase price $420,000 US.  Single position detached unwind shaftless. Pneumatic brakes.  Automatic tension load...
      For Information...
    • IEN# 120318 - 45 in.  Two Drum Surface Slitter Mfg. Dusenbery. Model 840-AR. This machine comes equipped with a Dusenbery stand alone Unwind stand for a 50" diameter roll. This unwind is equipped with a 12" pneumatic brake controlled by a Dusenbery closed loop...
      For Information...
  • Doctor Winders
    • IEN# 125979 - 4” Dusenbury Table Salvage Rewinder, Model 750AB, ½ HP. Was in operating condition when pulled out of service for newer equipment. Table Winder can be seen under power.
      For Information...
    • IEN# 125980 - 4” Dusenbury Table Salvage Rewinder, Model 750AB, ½ HP. Was in operating condition when pulled out of service for newer equipment. Table Winder can be seen under power.
      For Information...
    • IEN# 125978 - 13.5” Arpeco Tracker Salvage Slitter Rewinder. Was in operating condition when pulled out of service for newer equipment. Web width 12”. May be seen with mechanical and electrical turnover.
      For Information...